REAL DEPLOYMENT CASE STUDY | VIETNAM
REEMAN Ironhide Autonomous Forklift Successfully Deployed at a Footwear Factory in Vietnam
REEMAN has successfully deployed its Ironhide Autonomous Forklift at a large footwear manufacturing factory in Vietnam, automating the movement of finished footwear between factory production and warehouse areas.
The project addresses a practical internal logistics requirement: transporting palletized finished shoes over relatively long distances while operating through existing factory passages, outdoor connecting sections, and different floors.
Completed in just four days, the deployment is now in actual factory use. The autonomous forklift handles approximately 500–700 kg per pallet, travels around 350 meters one way, and completes approximately 60–80 full round trips per day without a driver or manual intervention during the configured transport tasks.

REEMAN Ironhide operating at the Vietnamese footwear manufacturing facility.
Actual Project Performance
Customer Background: Finished Footwear Transportation in Vietnam
The customer operates a large footwear manufacturing facility in Vietnam. Finished shoes are packed into cartons, placed on pallets, and transferred between production and warehouse areas as part of the factory's daily logistics operations.
At this facility, the selected transportation route covers approximately 350 meters in one direction. The route passes through different operating areas, including indoor passages and a relatively flat outdoor connecting section.
The factory's regular operating passages are approximately 4 meters wide, while the narrowest sections measure around 2 meters. The site also has multi-floor transport requirements and incomplete network coverage between some workshops.
These conditions created a practical application for an autonomous forklift capable of transporting real production goods along a configured route without continuous network connectivity.
Project Information and Operating Conditions
The Challenge: Automating Repetitive Pallet Transport
The factory required a way to automate the repetitive movement of finished footwear between designated locations. The application involved long-distance transport, different passage widths, outdoor travel, and coordination between factory areas.
Long-Distance Internal Logistics
With approximately 350 meters of one-way travel, repetitive pallet transportation represents a substantial daily material handling task. An automated solution needed to repeat the configured operation consistently.
Existing Factory Layout
The route includes different aisle widths and a flat outdoor section. The deployment needed to accommodate these real environmental conditions without installing fixed navigation tracks throughout the factory.
Incomplete Network Coverage
Connectivity is interrupted in certain parts of the factory. The automated transport process therefore needed to continue functioning without relying on a permanent network connection.
Multi-Floor Material Movement
The facility also requires transport between different floors, making elevator integration an important element of the overall application.
The Solution: REEMAN Ironhide Autonomous Forklift
REEMAN introduced its Ironhide Autonomous Forklift to handle the customer's finished-footwear pallet transportation.
The forklift combines onboard autonomous navigation, pallet recognition, and obstacle detection capabilities to support automatic material handling in an existing industrial environment.
Automatic Pallet Pickup → Autonomous Transportation → Obstacle Avoidance → Destination Arrival → Automatic Pallet Placement → Repeated Task Execution
Automatic Pallet Pickup
At the designated pickup point, the forklift automatically collects a pallet of finished shoes. Actual transported loads are approximately 500–700 kg.
Autonomous Route Execution
After collecting the pallet, Ironhide follows the configured route through the factory, including indoor passages and a flat outdoor section.
Automatic Delivery
At the assigned destination, the forklift completes the placement process automatically without manual handling during the configured task.
Repeated Transport Operations
The forklift operates according to preset routes and task sequences, supporting repeated pallet transportation throughout the working day.

Actual pallet transportation along the outdoor section of the Vietnamese footwear factory.
Four-Day On-Site Deployment and Commissioning
One of the notable results of this project was the on-site deployment period. REEMAN completed the installation and commissioning process in approximately four days.
The implementation involved configuring the transport route, defining pickup and destination locations, and validating the forklift's autonomous movements under the factory's existing operating conditions.
The project did not require the installation of magnetic strips or fixed navigation tracks along the route. The factory's incomplete network coverage also did not prevent normal configured autonomous transportation.
Following deployment, the factory put the system into actual use. REEMAN engineers later recorded on-site acceptance footage showing one of the operating routes.
Real Factory Video: Ironhide Operating in Vietnam
The following video shows actual REEMAN Ironhide operation at the Vietnamese footwear manufacturing facility. It was recorded by REEMAN engineers during an on-site acceptance inspection after the factory had already started using the system.
Watch on YouTube: REEMAN Ironhide Vietnam Footwear Factory Case Video
Video Timestamps
00:00 - Automatic pallet pickup at the designated warehouse pickup point.
00:20 - Autonomous pallet transportation begins along the preset route.
00:29 - The forklift passes through a relatively flat outdoor section.
00:58 - The forklift reaches the warehouse area.
01:10 - Arrival at the designated warehouse destination.
Video note: This footage has been accelerated. The reported actual transport trip takes approximately 4 minutes and 10 seconds. The recording represents one selected operating route, not a complete daily operating record. The implemented elevator journey is not shown in this particular video.
REAL SITE ENGINEERING ADVANTAGE
Network-Independent Autonomous Operation
A particularly valuable aspect of the Vietnam deployment is the forklift's ability to perform configured transportation tasks without a network connection.
The factory does not have complete network coverage across its operating areas. Connections may be interrupted as the forklift travels between workshops.
These interruptions do not affect the REEMAN Ironhide's normal execution of its preconfigured autonomous transportation tasks.
The forklift uses onboard navigation and control capabilities to continue operating independently of continuous network availability.
As a result, the customer did not need to rebuild the factory-wide wireless network for the configured autonomous transport application. Optional remote monitoring or external management integrations may have separate communication requirements.
Elevator Integration for Multi-Floor Logistics
In addition to the transportation route documented in the video, the Vietnam deployment has implemented autonomous forklift operation involving an elevator for material movement between floors.
The factory's reported elevator dimensions are approximately 2.8 meters long, 2.5 meters wide, and 2.0 meters high.
This enables the autonomous material handling solution to support logistics operations across different levels of the facility rather than limiting its application to a single floor.
Although the elevator integration is operating at the factory, the acceptance video shows only one selected transportation route and does not capture the elevator journey.
For other factories, elevator integration requires an individual assessment of cabin dimensions, rated capacity, forklift clearance, pallet dimensions, communication interfaces, and safety requirements.
Actual Operating Results After Deployment
The value of this project is demonstrated through the factory's reported operating conditions after the autonomous forklift entered actual use.
500–700 kg Actual Pallet Loads
The forklift transports pallets of finished footwear weighing approximately 500–700 kg per load. This figure represents the customer's actual transported goods, not merely a maximum rated load.
350 Meters of One-Way Transportation
The reported route covers approximately 350 meters in one direction. A complete outward and return movement along the same route represents around 700 meters of travel.
60–80 Complete Round Trips per Day
The factory reports approximately 60–80 full round trips daily. These figures refer to complete outward-and-return cycles rather than individual one-way deliveries.
Based on the reported route distance and daily cycle count, the corresponding theoretical route travel is approximately 42–56 kilometers per day, assuming every cycle uses the same 700-meter round-trip route. This is a calculated estimate, not an independently measured odometer reading.
Approximately 4 Minutes 10 Seconds per Reported Trip
The reported transport trip takes approximately 4 minutes and 10 seconds. The case video is accelerated and should not be used to calculate the actual operating speed.
Together, these observations provide a practical reference for evaluating autonomous pallet transportation in large footwear manufacturing facilities.
What This Deployment Demonstrates for Manufacturers
1. Autonomous Forklifts Can Support Longer Factory Routes
The approximately 350-meter one-way route demonstrates how autonomous pallet handling can connect separated production and warehouse areas.
2. Existing Facilities Can Be Evaluated for Automation
The project was implemented in an operating factory with existing passages and outdoor connecting sections, without installing magnetic navigation strips.
3. Network Gaps Do Not Have to Interrupt Autonomous Transportation
The forklift continues its configured transport tasks despite network interruptions between workshop areas.
4. Multi-Floor Material Handling Can Be Integrated
The implemented elevator integration extends autonomous forklift operation beyond horizontal transportation.
5. Real Operating Data Provides a More Useful Reference
Actual payloads, route lengths, daily round trips, deployment time, and real factory footage offer concrete information for manufacturers evaluating similar applications.
The case demonstrates operational deployment and reported transport performance. Quantified labor savings, financial payback, or productivity improvement percentages would require additional customer-specific measurements.
Frequently Asked Questions
Q1. Has REEMAN deployed an autonomous forklift in a Vietnam footwear factory?
A: Yes. REEMAN successfully deployed its Ironhide Autonomous Forklift at a large footwear manufacturing factory in Vietnam. The system is in actual use for finished-footwear pallet transportation.
Q2. What goods does the forklift transport?
A: It transports pallets containing cartons of finished shoes, with actual loads of approximately 500–700 kg.
Q3. How far does the autonomous forklift travel?
A: The reported transportation route is approximately 350 meters one way and approximately 700 meters for a complete outward and return journey.
Q4. How many daily transport cycles does the forklift complete?
A: The factory reports approximately 60–80 complete round trips per day, rather than 60–80 individual one-way movements.
Q5. Does the REEMAN Ironhide require Wi-Fi to operate?
A: No. The forklift can complete its configured autonomous transportation tasks without a network connection. Network interruptions at this Vietnamese factory do not affect normal route execution.
Q6. Can the forklift operate in outdoor areas?
A: Yes, under suitable operating conditions. The route at this factory includes a relatively flat outdoor section connecting different areas.
Q7. Can the autonomous forklift use an elevator?
A: Yes. Elevator integration has been implemented at this facility for multi-floor transportation. The reported elevator dimensions are approximately 2.8 m × 2.5 m × 2.0 m.
Q8. How long did REEMAN take to deploy the system?
A: On-site deployment was completed in approximately four days. Other projects may require different deployment periods depending on site conditions and integration needs.
Q9. Does the forklift require a human operator for pallet pickup and delivery?
A: No. On its configured route, the forklift automatically picks up, transports, and places pallets without manual intervention.
Q10. How long does one reported transport trip take?
A: The reported trip time is approximately 4 minutes and 10 seconds. The published video has been accelerated for viewing.
Q11. Is this a real factory deployment or a demonstration?
A: This is a real operating deployment. The video was recorded by REEMAN engineers during on-site acceptance after the factory had already started using the autonomous forklift.
Conclusion: A Real REEMAN Autonomous Forklift Deployment in Vietnam
The successful implementation of the REEMAN Ironhide Autonomous Forklift at this Vietnamese footwear manufacturing facility demonstrates how automatic pallet handling can be integrated into existing industrial logistics operations.
With approximately 350 meters of one-way transport, actual pallet loads of 500–700 kg, 60–80 complete daily round trips, four-day deployment, network-independent autonomous operation, and implemented elevator integration, the project provides a real-world reference for footwear manufacturers considering logistics automation.
The forklift is not simply performing a controlled demonstration. It has been introduced into the customer's actual manufacturing workflow, with on-site acceptance footage recorded after the factory had started using the system.
For factory operations managers, warehouse logistics teams, and automation engineers, this deployment illustrates a practical approach to repeated pallet transportation across production and storage environments.
REEMAN | REAL FACTORY AUTOMATION
Explore REEMAN Ironhide Autonomous Forklift
Discover autonomous pallet pickup, intelligent navigation, obstacle avoidance, and industrial material transportation solutions for manufacturing and warehousing.
View Ironhide Autonomous ForkliftREEMAN - Autonomous Material Handling for Real Manufacturing Environments.

